Window Roll down with Keypad
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70096
Printed Date: July 12, 2025 at 4:27 AM
Topic: Window Roll down with Keypad
Posted By: jasonx6
Subject: Window Roll down with Keypad
Date Posted: January 05, 2006 at 3:20 AM
Hey, i'm new to this site...
I drive a 1994 Mazda Mx6, my show car, and I have the door handles shaved. It's an Autoloc 8 channel kit, and so far, only 2 channels are used.(to open the doors)
I would like to be able to use atleast one channel to atleast be able to roll the DS window down. The PS isn't as importnant, but while i'm at it, I could do that side also!!!
How would I go about doing this? Something like this would be fairly new to me, but i'm confident!!!
So any help... Diagrams... anything?
-------------
1994 Mazda(show)Mx6 v6
1995 Mazda(sLow)Mx6 i4 ATX
Replies:
Posted By: Powermyster
Date Posted: January 05, 2006 at 4:32 AM
any 2 window mod will dothem down for ya. cost is about $30..
or get a mod that does 2 up and own will need two aux's for that though
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: customak47
Date Posted: January 05, 2006 at 1:17 PM
you can use one relay for roll down; find your ds window roll down wire at master switch, cut wire in half, switch side to 87a, motor side to 30, 12 volt fused constant to 87 and 86, and your preferred channel output wire to 85. use either validity output or timed output, depending on unit options
-------------
My rifle is my friend...
|