Viper 591XV
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70102
Printed Date: September 19, 2025 at 6:35 AM
Topic: Viper 591XV
Posted By: fasthondacr250
Subject: Viper 591XV
Date Posted: January 05, 2006 at 9:12 AM
First of all this site is great. I was lucky enough to find it while searching for my problem. I am sure with all the knowledge here someone can help me out. I purchased a SS silverado a few weeks ago that has a viper 591xv installed in it. I never got the remote for the truck so I purchased a new 479V remote. When I went to program it, the procedure would not work. I then began to check out the wiring. The button I thought was the valet button is actually the park neutral saftey switch. Where the valet and led light shoud be plugged into the control unit there is nothing there. Is it possible that the alarm was programmed with the bitwriter and the never connected the valet/led? Everything else is wired in. Where should I go from here? Thanks for the help.
Replies:
Posted By: kgerry
Date Posted: January 05, 2006 at 9:30 AM
take it to a directed dealer and see if they'll learn it for you or ask if they have any spare led's and programming switches they feel generous enough to give you or sell you cheap.... we take them out after we learn tach so customers cant reprogram features accidentally.... i have probably 300 in a box in the back of our shop.... i'm sure most DEI dealers are the same.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|