Alpine SEC-100S siren problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70129
Printed Date: April 28, 2024 at 11:53 PM

Topic: Alpine SEC-100S siren problems

Posted By: copekyle
Subject: Alpine SEC-100S siren problems
Date Posted: January 05, 2006 at 4:28 PM

Recently I installed an Alpine SEC-100S alarm in my accord. When I started the siren output (brown wire) was pulsing voltage when the alarm went out. When I finished the install and hooked up this wire (the last one to be hooked up), it was showing a 12 volt constant charge. Any ideas what happened? Did I fry my out put wire? and if so, can I use the auxilary headlight wire to hook into the car's horn?

Thanks in advance

Replies:

Posted By: abinns
Date Posted: January 11, 2006 at 7:32 PM

My siren wire is doing the exact same thing. Have you been able to fix yours?

Print Page | Close Window