Galaxy 5000RS not reading remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70205
Printed Date: May 14, 2024 at 11:05 PM

Topic: Galaxy 5000RS not reading remote

Posted By: etm0r0n
Subject: Galaxy 5000RS not reading remote
Date Posted: January 06, 2006 at 7:43 PM

i installed the alarm and everything seemed right so far .

i turned the key to the " on " position 4 times and the siren chirped and i pressed the overide switch and everything is great but nothing happens when i press button 1 on the remote .

so i tried to do it over and over and nothing happens .

did i install the antenna wrong or something ? i checked it several times and even stuck both blue and white connector into the antenna box .

help me please . this is for a 1995 nissan 240sx SE .

also i leave the battery in the remote , do i have to take out the battery to reset it or anything or do i have to reset the alarm itself too .

thank you in advance .

Replies:

Posted By: Powermyster
Date Posted: January 06, 2006 at 7:57 PM

on,off,on,off,on,off,on siren will chirp when in the on position press and hold the valet switch for 5 seconds the siren will chirp and LED stay on then press button 1

button 1 on the lcd pager is the arm and disarm button

you should not need to replace the battery in the remote but i would do it just in case.

make sure the valet and ariel are plugged in right..

doe both the pagers not work

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: etm0r0n
Date Posted: January 06, 2006 at 9:15 PM

Powermyster wrote:

on,off,on,off,on,off,on siren will chirp when in the on position press and hold the valet switch for 5 seconds the siren will chirp and LED stay on then press button 1

button 1 on the lcd pager is the arm and disarm button

you should not need to replace the battery in the remote but i would do it just in case.

make sure the valet and ariel are plugged in right..

doe both the pagers not work

i did all that but when i pressed the button 1 nothing happens at all .

i changed the battery on BOTH remotes but still nothing.

im 100% sure the valet switch is plugged in right but what is a " ariel " plug ?

so far i kept trying and kept pressed button one . i even tried to take out and put the battery back in while the led was lit , but nothing happens .

any other ideas ?

thank you

Posted By: Powermyster
Date Posted: January 07, 2006 at 10:45 AM

by ariel plug i mean the antenna plug. where did you get the system

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: etm0r0n
Date Posted: January 07, 2006 at 11:53 PM

Powermyster wrote:

by ariel plug i mean the antenna plug. where did you get the system

i got it from ebay about 2 years ago ... i figured hey theres an alarm might as well just install it . but yeah still not reading .

one time i just pressed it and it worked but litterally less then a min later it didnt read the remote anymore so i know the antenna and everything works . even started the car with remote start .