Passlock II 95 bonneville wires?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70272
Printed Date: September 13, 2025 at 11:47 PM
Topic: Passlock II 95 bonneville wires?
Posted By: overl
Subject: Passlock II 95 bonneville wires?
Date Posted: January 07, 2006 at 3:44 PM
I'm trying to install a 555L bypass module in my 95 Pontiac Bonneville. I'm having trouble finding the correct Passlock wires. Does anyone know what color I should be looking for and where they are located? Are they along with the heavy ignition wires in the steering column or are they a lighter gauge wire located elsewhere?
Thanks!!
Replies:
Posted By: sparkie
Date Posted: January 07, 2006 at 5:00 PM
The 95 Bonneville uses a VATS system not Passlock. Make sure that the 555l is compatible with a VATS system. If not you can use a relay and resistor. The wires you need to tie into are inside either an orange or black insulation. They follow the main igntion wires. There are two thin white wires inside the orange or black insulation.
-------------
sparky
Posted By: jacqueslacombe
Date Posted: January 08, 2006 at 3:48 AM
HI! For the resistor value take a ohmeter and mesure the resistance off the black pallet on the key there are 11 differentes values..... This will do the job using a relais and this is this is the chippest way ...
-------------
cocolaboy
Posted By: spike_jdog5
Date Posted: January 08, 2006 at 5:49 PM
it should be in an orange cable two white wires test the resistance off the key and cut both white wires loop the resistor away from the key side and bypass tape up the wires coming from the key side
|