dodge 2500 remote starter
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70324
Printed Date: September 12, 2025 at 3:27 PM
Topic: dodge 2500 remote starter
Posted By: terry72110
Subject: dodge 2500 remote starter
Date Posted: January 08, 2006 at 11:53 AM
hello, I need info on how to install a shelby CS-350R remote starter on a dodge 2500 dieses, 4x4 4door 05 model. do I need any relays, or bypass switches, if i cut a wrong wire will it fry my computer or anything else,
-------------
Terry
Replies:
Posted By: Mike M2
Date Posted: January 08, 2006 at 12:24 PM
Use a 457C for interface. If you have gray keys, you need a bypass mod.
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: chriswallace187
Date Posted: January 08, 2006 at 12:45 PM
I'd strongly suggest getting that professionally installed...if you haven't done a remote start before an '02-up Dodge pickup isn't a good vehicle to learn on - it's got at least two circuits that have to be interfaced with relays and resistors, and if it has grey keys it's also got an immobilizer that needs bypassed.
If you're determined and have at least a full day to play around with it, here's some info.
The truck has 2 ignition wires and 3 or 4 accessory wires. You'll need relays for however many outputs you don't already have from the remote start unit.
If your remote start has (+) parking light output, you won't need parts. If it's only got a (-) output, you'll need a relay and resistor for light flash.
Power doorlocks and factory alarm arm/disarm will also require relays and resistors.
And finally as I mentioned above, if the truck has grey keys it has an immobilizer that needs bypassed.
-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
|