2003 is300 headlights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70368
Printed Date: May 17, 2025 at 1:25 PM

Topic: 2003 is300 headlights

Posted By: bhurlebaus
Subject: 2003 is300 headlights
Date Posted: January 08, 2006 at 10:53 PM

just installed a aps-996a in a 03 is300 and have a question. how can i pulse the drivers door pin to turn off the auto headlights with out setting off the alarm. i went to the bcm for the door trig and diode iso all of them.
thanks for the help

Replies:

Posted By: dare_ds69
Date Posted: January 10, 2006 at 7:43 AM

use the factory alarm rearm wire to trigger the door triger

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: bhurlebaus
Date Posted: January 11, 2006 at 12:25 AM

if you would use the neg pulse from the rearm it would set off the 996 alarm caz it would think the door was opened i think i need to break the trigger wire while i pulse it so do i do that like a starter disable only use constant insted of ignition and use the rearm to trigger the door pin + the relay

Print Page | Close Window