Print Page | Close Window

2004 toyota tundra 4 door, locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70429
Printed Date: May 07, 2025 at 3:02 PM


Topic: 2004 toyota tundra 4 door, locks

Posted By: hondastunt
Subject: 2004 toyota tundra 4 door, locks
Date Posted: January 09, 2006 at 9:16 PM

posted_image

what is used for this child safety door lock system? diode OR resistor




Replies:

Posted By: Chris Luongo
Date Posted: January 09, 2006 at 9:19 PM
The black pieces are diodes, but that is not the correct diagram for your Tundra. Hopefully someone will come along with a link to the right one.



Posted By: mo12v
Date Posted: January 09, 2006 at 9:30 PM
https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdf

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: Mike M2
Date Posted: January 10, 2006 at 6:31 AM
That diagram is for the 4 door Tundra only. If it's a 2 door or extended cab you use just negative pulse locks, WHITE/ green for lock and blue/red for unlock with a double pulse.

-------------
Mike M2
Tech Manager
CS Dealer Services



Posted By: mo12v
Date Posted: January 10, 2006 at 8:51 AM
HMMM............
Topic: 2004 toyota tundra 4 door

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: Mike M2
Date Posted: January 10, 2006 at 4:45 PM
posted_image oh....yea.......

-------------
Mike M2
Tech Manager
CS Dealer Services



Posted By: hondastunt
Date Posted: January 11, 2006 at 1:38 AM
what size diodes do I use.



Posted By: 05gt
Date Posted: January 11, 2006 at 2:21 AM
just use the 1 ampers, they will be fine



Posted By: Mike M2
Date Posted: January 11, 2006 at 6:33 AM
Also, you can use 12V from inside the door, you don't need to run it. Use the large blue wire on the back of the switch mod....

-------------
Mike M2
Tech Manager
CS Dealer Services


Print Page | Close Window