Print Page | Close Window

2004 civic remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70430
Printed Date: May 30, 2024 at 6:49 AM


Topic: 2004 civic remote start

Posted By: mobilecustoms
Subject: 2004 civic remote start
Date Posted: January 09, 2006 at 9:24 PM

on a 2004 civic lx. the owner wants a dual stage unlock installed on a Valet 562t. Which wire is needed to be cut and a relay installed? How does the relay get wired? Where is the wire in the car that needs to be cut for the drivers door priority located?



Replies:

Posted By: mo12v
Date Posted: January 09, 2006 at 9:33 PM

Drv Door UnlockYELLOW /GREENAT UNDER DASH FUSE/RELAY BOX

Cut  UNLOCK Wire in Half.
One Half goes to SWITCH
One Half goes to ACTUATOR

SPDT Relay:

PIN 87 =  12 Volts ( + ) Constant
PIN 87a =  wire from Door Lock Switch
PIN 30 =  wire to Actuator
PIN 85 = Negative Lock Output from Alarm
PIN 86 = Constant 12 volt ( + )



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: mobilecustoms
Date Posted: January 09, 2006 at 9:43 PM
does it matter if 87a and 30 are reversed?



Posted By: mo12v
Date Posted: January 09, 2006 at 9:46 PM
YES.........
Wire just like posted or Damage can result to Switch

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: mobilecustoms
Date Posted: January 09, 2006 at 9:48 PM
ok thanks a lot


Print Page | Close Window