Print Page | Close Window

Ford Escort Clutch Bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70450
Printed Date: May 14, 2025 at 11:35 PM


Topic: Ford Escort Clutch Bypass

Posted By: toolie
Subject: Ford Escort Clutch Bypass
Date Posted: January 10, 2006 at 12:39 AM

Hi looking to install a remote start ( DEI 561T ) in a 2001 ford escort  zx2 manual trans. Im having a hard time finding the right wire for the clutch bypass. I see theres a "clutch intrupter" and a netural switch. Any suggestions on how I can bypass it . Also the error code I get is netural saftey switch shutdown from the remote start.




Replies:

Posted By: sdempsey
Date Posted: January 10, 2006 at 7:38 AM

try connecting your starter output wire from remote start directly to the red wire at the clutch.





Posted By: toolie
Date Posted: January 10, 2006 at 7:03 PM

the wire from the remote start that is supposed to energize the starter is hooked to the solenoid. The problem is on probing that wire with a voltmeter its not evan getting power. Somewhere the remote start brain is being told not to send power to that wire therfore not  starting my car. the only error code I get from the remote start is netural saftey switch. I also tried just flat out grounding the ( - netural saftey wire off the remote start ) and thats not working somethings odd.





Posted By: playtilithrtz
Date Posted: January 10, 2006 at 9:33 PM
toolie wrote:

Hi looking to install a remote start ( DEI 561T ) in a 2001 ford escort  zx2 manual trans. Im having a hard time finding the right wire for the clutch bypass. I see theres a "clutch intrupter" and a netural switch. Any suggestions on how I can bypass it . Also the error code I get is netural saftey switch shutdown from the remote start.


inorder to bypass the clutch  you need to short out the 2 wires that are located on the cluch switch. it should be located right behind the clutch. thats the way i passed all my cars that are manual.






Print Page | Close Window