Print Page | Close Window

03 f-150 remote cranks but won’t start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70537
Printed Date: May 16, 2025 at 6:25 PM


Topic: 03 f-150 remote cranks but won’t start

Posted By: rlee85
Subject: 03 f-150 remote cranks but won’t start
Date Posted: January 11, 2006 at 10:58 AM

I've installed a remote start alarm system in my f-150 and attatched all of the wires correctly except the hood pin input there is no hood pin that came with the system.  when i hit the start button the vehicle turns on and then cranks for about .5 second then stops and it doesn't fire up.  After that the remote beeps and indicates that the hood has been opened.  I do not have the hood input wired to a hood pin i just left it alone and capped it off.  It is a negative input, the manual says that it recieves a ground signal when the hood is opened so I thought i could bypass that by simply not attatching it to anything but it isn't working..        Any help would be greatly appreciated 




Replies:

Posted By: kgerry
Date Posted: January 11, 2006 at 11:36 AM
what bypass module did you use??

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: rlee85
Date Posted: January 11, 2006 at 11:51 AM
didn't use a bypass module do i need one




Posted By: kgerry
Date Posted: January 11, 2006 at 11:56 AM
yep.... if you want it to start you do....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: rlee85
Date Posted: January 11, 2006 at 11:58 AM
which one do i need the vehicle is a 2003 f-150 stepside extended cab it has a factory keyless entry




Posted By: forbidden
Date Posted: January 11, 2006 at 12:47 PM
You need either a PATS1 or PKF. Wire the hoodpin properly as it is a safety device for the remote start. It is a instant kill line if the vehecle is accidentaly remote started with the hood open.

-------------
Top Secret, I can tell you but then my wife will kill me.





Print Page | Close Window