Print Page | Close Window

Viper 850xv in 2006 GMC truck

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70557
Printed Date: May 18, 2025 at 4:55 AM


Topic: Viper 850xv in 2006 GMC truck

Posted By: tk064
Subject: Viper 850xv in 2006 GMC truck
Date Posted: January 11, 2006 at 5:31 PM

Vehicle is 4 Dr (clamshell king cab style) power locks but no factory keyless entry.  3 wire running to lock switch.  I have installed the VIper in street rods where I run all the wiring myslef, but not in a factory vehicle.

Any pitfalls or things to watch with this vehicle would be appreciated.

Tim




Replies:

Posted By: sparkie
Date Posted: January 11, 2006 at 6:55 PM
The truck has Passlock II. You didn't say if the truck was a full size or different. If it is you may need to use a module to control the door locks.

-------------
sparky



Posted By: tk064
Date Posted: January 11, 2006 at 7:55 PM
Full size silverado.  What module do I need?



Posted By: tk064
Date Posted: January 11, 2006 at 8:09 PM
To clarify, not too concerned about the remote start feature, just the locks, sensors and and additional actuator that locks and unlocks a custom toolbox.


Print Page | Close Window