ProStart CT3200 Ford Windstar

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70597
Printed Date: May 21, 2024 at 2:50 AM

Topic: ProStart CT3200 Ford Windstar

Posted By: mushota
Subject: ProStart CT3200 Ford Windstar
Date Posted: January 12, 2006 at 9:56 AM

When I attempt to remote start the Ford 2000 Windstar.. the parking lights are activated and then flashes three times, but starter will not engage. I am only able to remote start if the ignition key is in.

I am able to reset to factory and reprogram but still no luck. Ps. for the parking lights I used two relays. Did I miss something in the installation.

Any guidence on this matter will be greatly appreciated , its been three days

Replies:

Posted By: dea,can
Date Posted: January 12, 2006 at 12:34 PM

did u use a 555u made by dei to bypass the oem factory anti-theft system

-------------
dragon

Posted By: origin
Date Posted: January 12, 2006 at 1:20 PM

sound like a pats bypass issue, did you install one?? did you program it??

Posted By: woodn01
Date Posted: January 12, 2006 at 1:26 PM

check your status wire hookup. what way is the status output wires hooked up? what bypass module did you use?

Print Page | Close Window