Print Page | Close Window

Cold Start Activation for Command Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7062
Printed Date: August 20, 2025 at 7:10 PM


Topic: Cold Start Activation for Command Start

Posted By: frozen
Subject: Cold Start Activation for Command Start
Date Posted: December 23, 2002 at 3:22 PM

I have misplaced my manual for my Command Start.  I dont know the model but it was installed in 95 Might be a CS2400? My son accidently pressed the magical sequence of buttons on the Key-Fob and deactivated the cold temp feature.  I would really appreciate it if someone could tell me the sequence to activate the cold temp feature.  I live in Alaska and it is getting cold outside.




Replies:

Posted By: Velocity Motors
Date Posted: December 24, 2002 at 10:56 PM
  • open hood
  • depress the hood pin swithc and release immediately
  • parking lights will turn on
  • at the same instant that the lights turn on, tap the hood pin switch lightly
  • count 4 seconds to make sure parking lights are still on
  • press the transmitter button I long enough to shut off the lights
  • Now go through the sequence from the attached pdf link below:
  • Command Start Programming Instructions


-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window