How to wire clutch bypass for dodge neon

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70662
Printed Date: July 09, 2025 at 7:59 PM

Topic: How to wire clutch bypass for dodge neon

Posted By: jacbri
Subject: How to wire clutch bypass for dodge neon
Date Posted: January 13, 2006 at 12:54 AM

Ok this is the last thing left on the compusar 2W900FM-AS (manual). I desperately want this done because it has taken 3 of my days so far.

The clutch bypass wire on the neon is a yellow/red I believe. From the Alarm I will be using CN2-3 which is a green wire (-) ignition. I was told from a dealer this green wire needs to be used because CN2-2 is being used. ANy help would be appreciated. There is an internal relay.

Replies:

Posted By: 05gt
Date Posted: January 13, 2006 at 1:24 AM

just use the (-) starter wire from the second harness, this is what I used

and wire in a relay

Posted By: jacbri
Date Posted: January 13, 2006 at 2:38 AM

05gt]< wrote:

>just use the (-) starter wire from the second harness, this is what I used
and wire in a relay
how do you wire the relay?

Print Page | Close Window