running wires engine compartment

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70663
Printed Date: June 08, 2024 at 1:19 PM

Topic: running wires engine compartment

Posted By: monkeyspunk
Subject: running wires engine compartment
Date Posted: January 13, 2006 at 12:59 AM

Hello
I have a 2002 Chevy suburban.
Could some one let me know the best way to run wires from engine compartment to inside? I see the main wire harness
That’s about it (and its a tight fit) so if there is another way I would appreciate it. Thought I saw something about it in another post but could not find to this I apologize I purchased a gt-v12 alarm ever heard of it can’t find anything on it is it worth putting in

thanks

Replies:

Posted By: Velocity Motors
Date Posted: January 13, 2006 at 9:01 AM

Find any rubber gromet and cut a small slit into it with your utility knife and use a snake to pass the wires through from the inside of the truck through the firewall.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window