Print Page | Close Window

Program Nissan Factory Remotes

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70702
Printed Date: July 20, 2025 at 5:07 PM


Topic: Program Nissan Factory Remotes

Posted By: warpedimage3
Subject: Program Nissan Factory Remotes
Date Posted: January 13, 2006 at 6:38 PM

I have a 2001 Nissan Pathfinder and I believe my remotes lost the programming so I was wondering if anyone here knows how to program the factory remotes?

Thanks




Replies:

Posted By: leoslocks
Date Posted: January 13, 2006 at 10:17 PM
     Note: A maximum of 4 remote transmitters can be programmed.
     Obtain all remote transmitters.
     Close all doors.
     Insert and remove key from the ignition switch more than 6 times within 10 seconds.
     Indicators will flash twice.
     Insert key into the ignition switch and turn to ACC position.
     Press any button on first remote transmitter to be programmed.
     Indicators will flash twice to confirm correct programming.
     Oldest remote transmitter code is now erased.
     To program next remote transmitter:
     Unlock then lock vehicle using the LOCK/UNLOCK switch on the driver's door control pannel.
     Press any button on second remote transmitter to be programmed.
     Indicators will flash twice to confirm correct programming.
     Oldest remote transmitter code is now erased.
     Repeat above procedure to program remaining remote transmitters.
     To exit programming mode: Open driver's door.
     Check operation of all programmed remote transmitters.
     Note: Remote transmitters can also be programmed using diagnostic equipment.




Print Page | Close Window