Print Page | Close Window

Window modules on 05 Chevy Silverado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70732
Printed Date: May 18, 2025 at 4:13 PM


Topic: Window modules on 05 Chevy Silverado

Posted By: x-performance
Subject: Window modules on 05 Chevy Silverado
Date Posted: January 14, 2006 at 2:06 AM

Installed window modules by the directions and windows will not roll up. I've heard that you can't install them the regular way on the new chevys. Any help is appreciated.
thanks.



Replies:

Posted By: mo12v
Date Posted: January 14, 2006 at 8:13 AM

Window Up*Dr Front\ BLUE
PasFront\ BLUE
DrRear\ BLUE
PasRear\BLUE @ Each Switch Due to Data Link
Window Down*DrFront/ BROWN
PasFront/ BROWN
DrRear/ BROWN
PasRear/BROWN *

* Front Windows ......Reversal Rest At Positive Type Window Circuit

 *Rear Windows .....Reversal Rest At Ground Type Window Circuit



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: mike swanson
Date Posted: January 14, 2006 at 12:11 PM
You will need 4 relays and this get so crazy that I decided not to do these trucks it also makes the window roll very slow with the factory contol. We got it to work but the slow roll wasnt worth it.

So if you want to SLOW your ROLL then its ok



Posted By: x-performance
Date Posted: January 15, 2006 at 4:34 PM
so is it easier to do with 2 relays to each window using Reversal polarity method or can it be done with a window module some how?


Print Page | Close Window