K9-Classic installation manual

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70754
Printed Date: May 16, 2024 at 3:59 AM

Topic: K9-Classic installation manual

Posted By: witxp
Subject: K9-Classic installation manual
Date Posted: January 14, 2006 at 1:09 PM

Hi, does anyone have the installation manual manual for the K9-Classic? When it was installed we only got the operation guide. Now I wanted to add a remote starter to it myself.

I found this from another thead but it is for the extended version. Not sure if they use the same color codes and wiring diagrams.

https://www.wiringinstructions.com/install_guides/k9/k9-classic-e.pdf

Thanks

Replies:

Posted By: mike swanson
Date Posted: January 14, 2006 at 6:05 PM

Most remote starts have a - trigger in to activate it

If you adding a R/S to somthing els then all you need is the - trigger out from what your adding to

So just test the unit for a - output. it may be a cut off wire from when the 1st person installed the K9

Look for wires that are not connected

Posted By: mo12v
Date Posted: January 14, 2006 at 7:05 PM

Basically the same:

https://www.wiringinstructions.com/install_guides/k9/k-9classic.pdf

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: witxp
Date Posted: January 14, 2006 at 9:55 PM

Thank you very much. posted_image

Posted By: witxp
Date Posted: January 14, 2006 at 10:12 PM

mo12v] wrote:

P>Basically the same:
https://www.wiringinstructions.com/install_guides/k9/k-9classic.pdf

I was going over the pdf file and was a little confused at how the door locks are being triggered to lock/unlock. Can someone clarify this for me?

Thanks

Posted By: witxp
Date Posted: January 14, 2006 at 10:14 PM

Just realized it's a 4pin connector that's not listed on the pdf file.

Thanks

Posted By: mo12v
Date Posted: January 15, 2006 at 12:28 PM

Usually only 2 wires are on the Plug:
GREEN is Lock
BLUE is UNLock

If you have the 4 wire Plug:
Pink is second Unlock
Blue is 1st Unlock
Green is Lock
Red is 12 Volts + Constant for Relays

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.