2006 mazda 3, alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70780
Printed Date: May 20, 2024 at 10:16 AM
Topic: 2006 mazda 3, alarm/remote start
Posted By: maxcat
Subject: 2006 mazda 3, alarm/remote start
Date Posted: January 14, 2006 at 5:07 PM
hello, anyone out there installed into a 2006 mazda 3 yet. just wondering whats all involved in getting to the ignition switch to install the pats 4 bypass module. is it tough to get to the swich,ie. how hard is it to get the steering cowling off. any advice would be greatly appreciated. thank-you in advance
Replies:
Posted By: JWorm
Date Posted: January 14, 2006 at 6:52 PM
Easy car unless its a manual and you have to tie into the door triggers. The steering column comes off easy. I used a databus bypass module (PKF3) on the one I recently did.
Posted By: maxcat
Date Posted: January 14, 2006 at 10:09 PM
thanks for the help JWorm, do you happen to know if the pkf3 is compatable with the 2006, the specs say only up to 05. once again thanks for the reply.
Posted By: Alpine Guy
Date Posted: January 14, 2006 at 10:11 PM
05/06 No changes, you'll be good to go.
-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
|