Remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70787
Printed Date: May 08, 2025 at 5:39 PM
Topic: Remote start
Posted By: aznracerx1989
Subject: Remote start
Date Posted: January 14, 2006 at 7:06 PM
I installed my alarm and the remote starter wont work.. The starter cranks but no sign of starting.. I can start with my key though.
Replies:
Posted By: mo12v
Date Posted: January 14, 2006 at 7:09 PM
Be nice to know more info..........
Year,Make, Model of vehicle
Name Brand & Model #, type ByPass
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: aznracerx1989
Date Posted: January 14, 2006 at 7:19 PM
1995 civic dx
Posted By: mo12v
Date Posted: January 14, 2006 at 7:28 PM
Did you hook up TACH & Program........ | Tach Signal | BLUE | AT TACH TEST CONNECTOR * |
* Tach Test Connector Located On Driver Rear Corner Of Engine Compartment. | Constant 12 volts | WHITE | IGNITION SWITCH HARNESS | | Ignition 12 volts | BLACK / YELLOW | IGNITION SWITCH HARNESS | | Starter | BLACK/ WHITE | IGNITION SWITCH HARNESS |
| Ignition #2 | YELLOW | IGNITION SWITCH HARNESS | | Ignition #3 | N/A | | | Accessory | WHITE/ BLACK | IGNITION SWITCH HARNESS |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: the12volt
Date Posted: January 14, 2006 at 7:29 PM
Help us help you. When you create a topic, please give us as much information as possible, including the brands and model numbers of the products you are installing or having problems with. -------------  the12volt • Support the12volt.com
Posted By: aznracerx1989
Date Posted: January 14, 2006 at 7:29 PM
I had a friend do it for me... but he lives far away..
it worked when he first installed it.. but now it doesnt. so its something loose.. but can u tell me where to look
Posted By: mo12v
Date Posted: January 14, 2006 at 7:32 PM
Usually most wiring is done at the Ignition Switch Harness, but you will have to look
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: the12volt
Date Posted: January 14, 2006 at 7:35 PM
It's possible that nothing is lose and a toggle switch is in the wrong position. What alarm/remote start unit is installed in your vehicle? ------------- the12volt • Support the12volt.com
Posted By: aznracerx1989
Date Posted: January 14, 2006 at 8:45 PM
Nitro 2 way alarm
Posted By: aznracerx1989
Date Posted: January 15, 2006 at 1:46 AM
what would be most likely wrong if it cranks but no sign of starting??
Posted By: rdlybeck
Date Posted: January 15, 2006 at 11:10 AM
How long does it crank? You could extend the crank time if your system has that as a program option. Also a connection to an ignition wire could be bad. Do your dash lights come on when it cranks?
-------------
Ryan Lybeck
"Wiring diagrams are nice but still double check with DMM"!
Posted By: rdlybeck
Date Posted: January 15, 2006 at 11:17 AM
Also as Mo said check the tach. You may have to program it again because that is common in cranking but no starting situations. ------------- Ryan Lybeck
"Wiring diagrams are nice but still double check with DMM"!
Posted By: feenal
Date Posted: January 15, 2006 at 11:43 AM
make sure its not in valet mode
Posted By: aznracerx1989
Date Posted: January 15, 2006 at 9:50 PM
there is no light on dash when I start... I checked the ignition wire and it's fine.. must be a broken host unit from the alarm.. My installer checked the greeen wire (to ignition) coming out of my alarm and it barely gives off like .1 volt when i crank. He bypassed it so it will start with key in car and it worked using remote start(with dash light on) it cranks long enough to start.. my car starts up right away. like 3 sec
any other ideas
|