1998 Passport/Rodeo keyless entry prob

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7086
Printed Date: August 16, 2025 at 9:13 PM

Topic: 1998 Passport/Rodeo keyless entry prob

Posted By: dflynn4
Subject: 1998 Passport/Rodeo keyless entry prob
Date Posted: December 24, 2002 at 8:13 AM

I installed a Valiant remote starter with no problem. Works great. But, when I tried to hook up the remote lock/unlock option per the instuctions, I fried the window/lock switch in the drivers door. The Valient kit came with two optional relays and pretty vague instructions. My Passport does not have a factory alarm or factory keyless entry. Can anyone offer advise? I have a Helms manual with very specific electrical drawings but I am now unsure which wires are used and if I really need the extra relays sent with the kit. Thanks in advance. Dennis

-------------
dflynn4

Replies:

Posted By: 10nesne1
Date Posted: December 24, 2002 at 9:21 AM

Power Lock:			LT. GREEN/ RED (-)	DRIVER'S KICK PANEL *
Power Unlock:			RED / DK. BLUE (-)	DRIVER'S KICK PANEL *

* See Note #201 - Negative Pulse Door Lock Diagram. ** For Disarm, Yellow/Blue Wire Must Receive A Negative Pulse Simultaneously With The Unlock Pulse. For Arm, The Purple Wire Must Receive A Negative Pulse Simultaneously With The Lock Pulse. Split Off Of The Lock And Unlock Wires Respectively And Diode Isolate. Alarm Disarms Through Ignition For Remote Start.

It's Negative door lock system no required to hook it up. Have fun

Posted By: dflynn4
Date Posted: December 24, 2002 at 9:24 AM

Thats great! Thanks for the info. I will finish it up tonight.Merry Christmas!

-------------
dflynn4