03 Forester 2.5X/Viper 791XV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70954
Printed Date: May 18, 2024 at 10:57 PM

Topic: 03 Forester 2.5X/Viper 791XV

Posted By: leades12
Subject: 03 Forester 2.5X/Viper 791XV
Date Posted: January 17, 2006 at 1:55 AM

I just wanted to make sure I was doing this right, I have a 03 Forester and the Viper 791Xv, I want to hook up the domelight supervision, (wasn't hooked up at time of install) According to the wiring diagram it's the yellow- wire coming from all doors, except the drivers door which shows to be BLU/ORG, so, would this be correct:
86 to H1/4 BLK/WHT
85 to 12V constant
87 to ground
30 to -yellow (or would the blu/org work also?)
posted_image

Thanks for any help or advice.

-------------
Les

Replies:

Posted By: sonicsi16
Date Posted: January 17, 2006 at 8:05 AM

Use the yellow. If you used the blu/org, when you have your key in the ignition and the dome light supervision is on, the bell will chime (because the car thinks the driver's door is open).

Print Page | Close Window