What type fuse and holder to use?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71004
Printed Date: July 06, 2025 at 1:13 PM

Topic: What type fuse and holder to use?

Posted By: rdlybeck
Subject: What type fuse and holder to use?
Date Posted: January 17, 2006 at 7:44 PM

I was looking at waytekwire.com and was wondering what the difference is between the different fuse holders? What I mean is what type should I use in remote starts and door lock relays when I want to fuse 12 volts. ATO, Mini, Glass?

I havn't seen anyone ask this before. Thanks in advance!

-------------
Ryan Lybeck
"Wiring diagrams are nice but still double check with DMM"!

Replies:

Posted By: candy&chrome
Date Posted: January 17, 2006 at 7:48 PM

ato fuses are the most common, glass is old school, and mini's are new age but finding a holder for them is tricky

i would stick to the ato..........cheap, and easy to replace

-------------
canada's cold eh.

Posted By: del007
Date Posted: January 17, 2006 at 7:56 PM

normal blade fuse's are on most cars and avalible from auto stores the mini ones are a bit more expensive. the holders for normal size tend to be cheaper as been round longer.

-------------
Derek "Del"
I.B.M, C.M.S

Print Page | Close Window