2002 Ford Explorer Immobilizer wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71007
Printed Date: July 07, 2025 at 1:37 PM

Topic: 2002 Ford Explorer Immobilizer wiring

Posted By: uniquenigga
Subject: 2002 Ford Explorer Immobilizer wiring
Date Posted: January 17, 2006 at 9:17 PM

Trying to put in a Directed 555P Interface Module for a 2002 Ford Explorer PATS System. Does anyone have a wiring diagram or know the wiring colors of the immobilizer data tap, immobilizer sync tap? Also where are they located at in this vehicle? Any help will be greatly appreciated. Thanks.

-J

Replies:

Posted By: uniquenigga
Date Posted: January 17, 2006 at 10:21 PM

BUMP

Posted By: redpeppers
Date Posted: January 17, 2006 at 10:39 PM

r u sure u can use the 555p on that year? My info from directechs says it takes a 556sw.....and u dont interface into the wires.....u just run the capsule up around the ant ring....in 2001 instead of using the PATS they converted to the SecuriLock

-------------
Where theres is a wire there's a way.

Posted By: uniquenigga
Date Posted: January 18, 2006 at 5:26 AM

I was told by the seller of the piece that I could, but I guess I got screwed. Is there any way possible to use it? The car will start if the key is next to the ignition so I know there is a chip inside the key. Thanks for all of the help.

-J

Posted By: redpeppers
Date Posted: January 18, 2006 at 1:44 PM

take it back and trade it for the 556sw

-------------
Where theres is a wire there's a way.

Print Page | Close Window