98 jeep grand cherokee door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71031
Printed Date: July 17, 2025 at 12:34 PM

Topic: 98 jeep grand cherokee door locks

Posted By: mike swanson
Subject: 98 jeep grand cherokee door locks
Date Posted: January 18, 2006 at 10:01 AM

Any1 got the diagram for the door locks on a 98 jeep
There is a way to (splice into the ribbon) in the control mod so you dont have to use 4 relays and go in each door

Replies:

Posted By: curtis.moreland
Date Posted: January 18, 2006 at 10:08 AM

You could use DEI part number 455t door lock interface control module. Don't know if this will be any better then going to each door or not....

Curtis

-------------
It's Fun Ignoring The World !!!

Posted By: mike swanson
Date Posted: January 18, 2006 at 10:24 AM

i have a mod but the customer dosnt want to pay for it

I have done this b4, and i know it works. Its just been awhile since i had to do this.

The custome on the phone said it was a cherokee not a grand. He brings is to the shop and its a Grand.

Wow the guy dosnt even know what kind of car he has.LOL

Posted By: kgerry
Date Posted: January 18, 2006 at 11:10 AM

tell the customer there are two ways to do everything and one of them is PROPERLY..... if he doesnt want to pay for the module to do it properly then take it to some backyard mechanic.....

also, i would tell him that you quote a job based on the imformation that the customer provides to you... if they give the wrong info then they shouldnt be surprised if the job requires more parts than they were quoted....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: another-kelly
Date Posted: January 18, 2006 at 11:48 AM

i'd also tell him it's cheaper to buy the module then the extra parts and labor to not buy it

Posted By: mike swanson
Date Posted: January 18, 2006 at 1:02 PM

I just did the relay thing

But still,,,Any1 have the old way of doing this
I know you have to cut into the ribbon I want to know for other jeeps it an easy way and its safe. ive done this to more than 50 other jeeps back in the day. and the all still work fine. my bud still has his and it works fine. I did his back in 1998.

Posted By: mike swanson
Date Posted: January 18, 2006 at 6:37 PM

Any1 have the diagram for adding a keyless to the ribbon cable on a 98 jeep grand cherokee?????

I know that there is a B/P mod and that you can use relays ,but i know that there is another way by spliceing into the ribbon cable in the lock switch

Any1???????