Alarm/ Starter 2002 Neon

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71061
Printed Date: May 17, 2024 at 7:41 PM

Topic: Alarm/ Starter 2002 Neon

Posted By: b-roy
Subject: Alarm/ Starter 2002 Neon
Date Posted: January 18, 2006 at 6:08 PM

Hi all, recently put a Compusar alarm/starter combo in my '02 Neon. After the initial install I had a problem with the alarm falsing after remote start. The door pin wires would drop voltage, about 4-5 volts with the park light flash and this would set the unit off. To combat this I used the doorpin wire to trigger a relay instead getting rid of the problem, but.........

Now my dash lights do not work unless I open the door :oops:

Wondering if anyone had some thoughts before I get into it again.

Replies:

Posted By: mike swanson
Date Posted: January 18, 2006 at 6:31 PM

may want to use a diode ?????

Posted By: b-roy
Date Posted: January 18, 2006 at 6:40 PM

Wires were diode isolated prior to the install of the relay and still are. Unless you mean in a different way........

Posted By: cntrylvr79
Date Posted: January 18, 2006 at 7:03 PM

Have you checked all the fuses? Had something like that happen turned out a fuse blew. Don't remember where or which one it was sorry.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer