terminations? what do u use ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71071
Printed Date: June 02, 2024 at 3:07 PM

Topic: terminations? what do u use ?

Posted By: ryguy
Subject: terminations? what do u use ?
Date Posted: January 18, 2006 at 8:42 PM

i was wondering kinda a pole if u will ,on how some installers make terminations ? if they sodder ? use t - taps , or western style ? or butt connectors ? just wondering what people have had good luck with ?

-------------
MECP installer,technician

Replies:

Posted By: the12volt
Date Posted: January 18, 2006 at 8:47 PM

Most will tell you they solder their connections, however this topic has been discussed many times in this forum. Please take a moment to search through the forums to prevent posting duplicate topics.

-------------
posted_image

the12volt • Support the12volt.com

Posted By: the12volt
Date Posted: January 18, 2006 at 8:52 PM

https://www.the12volt.com/installbay/search.asp?KW=solder&SM=1&SI=TC&FM=0&OB=1

- Do you solder or tape your connections?

- butt connectors or solder

-------------
posted_image

the12volt • Support the12volt.com

Print Page | Close Window