Print Page | Close Window

plxr into 98 cadillac deville

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71072
Printed Date: July 07, 2025 at 5:09 AM


Topic: plxr into 98 cadillac deville

Posted By: importc
Subject: plxr into 98 cadillac deville
Date Posted: January 18, 2006 at 8:44 PM

I'm having some problems with installing a plxr bypass into my 98 cadillac deville. If anyone has any step by step instructions please do post them or link them or email me.. kinda needing asap so i can roll out... lol

-------------
dont try things you cant do.... for example.. <<< ME >>> lol



Replies:

Posted By: mo12v
Date Posted: January 18, 2006 at 9:25 PM
Find a Gray or Orange Sleeve that has 2 thin 24 guage wires in it ( usually 2 WHITE wires ), coming from Ignition switch
PLXR:
BLUE = White wire of VATS
VIOLET = Starter wire of Vehicle
PINK = Ignition 1 of Vehicle
RED = 12 Volt + Constant
BLACK = GROUND
BROWN = Negtive Out from R/S while Running ( Status wire )
Follow PLXR ByPASS Type Selection Mode Instructions for VATS

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: importc
Date Posted: January 19, 2006 at 7:19 AM
what do you mean NEGTIVE OUT from remote starter?

-------------
dont try things you cant do.... for example.. <<< ME >>> lol




Posted By: mo12v
Date Posted: January 19, 2006 at 7:46 AM
That would be a wire that provides a NEGATIVE Pulse While Cranking & Running from your Remote Start .
Not knowing the Unit you are installing.
If you are just using the PLXR ( ???? ) then the Brown wire needs to have a GROUND while the engine is Cranking & Running

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.





Print Page | Close Window