2000 Chevy Silverado alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71124
Printed Date: May 21, 2024 at 10:20 AM
Topic: 2000 Chevy Silverado alarm/remote start
Posted By: pitoaudiovisual
Subject: 2000 Chevy Silverado alarm/remote start
Date Posted: January 10, 2006 at 5:44 PM
Does any one have the paper work for a Chevy Silverado and please let me know if it needs a Bypass...Thanx in advance..
-------------
Confidence is the key to any project!!
Replies:
Posted By: Chris Luongo
Date Posted: January 10, 2006 at 6:16 PM
Have you used the Search feature?
Posted By: mo12v
Date Posted: January 10, 2006 at 7:06 PM
I use the OMEGA IM-01 or DB-PASS-23A https://www.directechs.com/directwire/wire_body.asp?action=select&yr=5925&product=Remote Start ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: ds1434
Date Posted: January 10, 2006 at 10:49 PM
One of the easiest installs you'll ever do. Everything you need is at the BCM under the column other than IGN wiring which is just above the BCM exiting the column. And yes you need a bypass for Passlock 2 and there's a hundred different ones you can use. My personal preference is a PLJX and is made by BYPASSKITS.COM. Very reliable and easy to install.
-------------
TechHead
Posted By: kgerry
Date Posted: January 11, 2006 at 8:41 AM
PLJX or GMBP....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: mo12v
Date Posted: January 11, 2006 at 2:15 PM
Come on..................
Haven't you guys used the IB-01?? Does PassLock, Driver Door, Door Locks, etc. ....more than the PLJX
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: kgerry
Date Posted: January 11, 2006 at 2:37 PM
and it does this on the pre-2003 vehicles? (since this thread is about a 2000 Silverado).... how does it do this on non-class II vehicles?
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: pitoaudiovisual
Date Posted: January 19, 2006 at 6:41 PM
I Installed an alarm to a 2000 chevy silverado and now the service engine light turned on and the transmission is acting up. Does anyone know why the light and the trans would start to act up or does anyone know where the computer for the transmission is . Thanx in advance.
-------------
Confidence is the key to any project!!
Posted By: redpeppers
Date Posted: January 19, 2006 at 6:50 PM
where did u tie in for the door trigger? need to know where u tag the wires in the truck before we can help.
-------------
Where theres is a wire there's a way.
Posted By: pitoaudiovisual
Date Posted: January 19, 2006 at 6:56 PM
The door triggers I connected from the BCM used tan for driver, orange for passenger. The tach installed at the ECM. Also power locks from BCM. I also installed the factory alarm disarm from the BCM.
-------------
Confidence is the key to any project!!
Posted By: pitoaudiovisual
Date Posted: January 19, 2006 at 7:23 PM
Question also I found the starter wire but it was really thin not like the normal size is the ignition wires the same size also..
-------------
Confidence is the key to any project!!
Posted By: sparkie
Date Posted: January 19, 2006 at 7:36 PM
Check to see if the white wire in the ignition harness has power on it with the ignition on. This should be in the same plug on the back of the fuse box as the thin yellow starter wire is. You may have blow a fuse under the hood. The white wire provides igntion power to the transmission module and if it isn't powered while the engine is running, the check engine light will come on and the transmission will be stuck in second gear. Resolve the problem ASAP as damage to the transmission will result.
-------------
sparky
Posted By: Velocity Motors
Date Posted: January 19, 2006 at 8:45 PM
Agreed !! Make sure that you power up the 2nd IGN WHITE wire on this vehicle otherwise you'll be in the market for a new tranny in about a week or two. Depending on the unit, you may need to add arelay for the 2nd IGN circuit.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: au5599
Date Posted: January 20, 2006 at 9:50 AM
pitoaudiovisual wrote:
I Installed an alarm to a 2000 chevy silverado and now the service engine light turned on and the transmission is acting up. Does anyone know why the light and the trans would start to act up or does anyone know where the computer for the transmission is . Thanx in advance.
check your outputs. Usually an issue with 2nd ignition
Posted By: au5599
Date Posted: January 20, 2006 at 9:52 AM
mo12v] wrote:
ome on..................
Haven't you guys used the IB-01?? Does PassLock, Driver Door, Door Locks, etc. ....more than the PLJX
2003 and newer has the data line linking the 2 computers together not 2002 and older. So it will not work. GMBP will be very quick and easy, not tapping into security wires at all.
Posted By: pitoaudiovisual
Date Posted: January 26, 2006 at 10:22 AM
Just wanted to say thanx to all the people who helped me with my problem.. You guys saved my reputation. THANX AGAIN. ------------- Confidence is the key to any project!!
Posted By: plywood
Date Posted: January 28, 2006 at 9:33 AM
Did you hook up the second ign. (white wire)? ------------- Matt
Always remember to test wires with a Digital Multimeter!
Posted By: wgrieves
Date Posted: January 29, 2006 at 8:25 AM
Check all your ignition leads. If one isn't fed it will not shift right after a remote start.
But will if you cancel the RS and start it with the key.
|