03 Trailblazer, viper 561T
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71133
Printed Date: May 14, 2025 at 10:39 PM
Topic: 03 Trailblazer, viper 561T
Posted By: billbear
Subject: 03 Trailblazer, viper 561T
Date Posted: January 19, 2006 at 9:25 PM
Had viper 561 T with 457g databus installed. The rear window defrost was tied in at the rear window with a relay ,now my blower stays running at like a #3 speed even tho i have set lower .My factory fobs wont set for driver 1 or driver 2 ,if use remote start (that was idea useing my factory fobs )note :have set to key in ign to set seats ,ect . My quuestion is whats next viper 563T junk viper ? or just yell loud at installer ?
Replies:
Posted By: ryguy
Date Posted: January 19, 2006 at 9:52 PM
well it may not be his fault ive had a bad module before but he also maybe could have done things better ?
-------------
MECP installer,technician
Posted By: billbear
Date Posted: January 19, 2006 at 11:26 PM
i am worryed about blower motor, if module is bad now, as it will go no lower than a #3 manual or auto settings even tho shows its at lowers setting #1 Not a great install if cost me get blower fixed and still not what i asked for . My other tb before had bus module(457g) works ok but have two remotes to do so ! thats what i wanted get away from
Posted By: au5599
Date Posted: January 20, 2006 at 9:47 AM
Did you really want seat memory and all that? Are you that lazy? Get everything on one remote. If it is equipped with factory alarm then a module for doorlocks will arm/disarm alarm. As for blower well that can be the blower resistor kinda common on them.
Posted By: Chris Luongo
Date Posted: January 20, 2006 at 10:06 AM
If it was professionally installed, why not just bring the car back to the place that did the job?
Hopefully they back up their work, and take responsibility for mistakes.
--If it's their fault, and they can fix it, they should.
--If it's their fault, and they are unable to fix it because something is now broken, they should be willing to pay to have it fixed.
--If they believe it is a coincidence and not their fault, they should be willing to explain why.
Posted By: billbear
Date Posted: January 20, 2006 at 11:14 AM
1st I paid for all the bells. 2nd yes I am lazy and handicapped, so helps to use easy exit .3rd wife is short sure makes it nice with out having to set seats and mirrors . Don’t knock it less you tried it. Thanks for your response have nice day. And no I not over weight
Posted By: billbear
Date Posted: January 20, 2006 at 11:19 AM
Sorry about the text try again 1st I paid for all the bells. 2nd yes I am lazy and handicapped, so helps to use easy exit .3rd wife is short sure makes it nice with out having to set seats and mirrors . Don’t knock it less you tried it. Thanks for your response have nice day. And no I not over weight
Posted By: au5599
Date Posted: January 20, 2006 at 2:06 PM
Nobody said you were over weight. There is just some things you dont want to mess with. Those trucks have a few computers in there that communicate through 1 wire. You are trying to make it do alot more so it may give you issues. Easy way with no issues is to do it all on aftermarket remote. But hey what do I know I just been doing this for well over 7 years all year round. Just remember 1 data wire does everything for your door locks and other stuff.
Posted By: billbear
Date Posted: January 20, 2006 at 6:08 PM
Well the heater on higher speed was the back controls was on for 2nd row seats, i didnt even know i had that thought was just a radio there .As far as remote i am saying they told me all stuff on my factory remote would be same .Every thing i was told was for next model up from the 561t and at $300 total i may as well had dealer install at $350 (not gm ) thanks for responce
Posted By: au5599
Date Posted: January 21, 2006 at 5:39 PM
billbear wrote:
My factory fobs wont set for driver 1 or driver 2 ,if use remote start (that was idea useing my factory fobs )note :have set to key in ign to set seats ,ect
What are you using to trigger the remote start? The factory remote? If so what button are you using to trigger it?
Posted By: billbear
Date Posted: January 21, 2006 at 10:26 PM
What are you using to trigger the remote start? The factory remote? If so what button are you using to trigger it? Have set to hit lock 3 times, last i took in they set it so remote start sets seats when you hit 3 times. I wanted that to happen when put key in ign. My idea now would be, have take that wire back off put in relay when in remote start as soon as hit door open it kills remote start and i can start as norm. Seeing what i want and cant get, this be easy way to do it .Other wise have put key in ign. fumble in dark hit button 1 or 2 (back to being lazy huh ) lol. I asked if can use red button seeing i never use it . Think i need move to Florida ?
|