Memory Seats 791xv
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71138
Printed Date: May 15, 2025 at 5:02 AM
Topic: Memory Seats 791xv
Posted By: MistercMK
Subject: Memory Seats 791xv
Date Posted: January 19, 2006 at 10:05 PM
I will be installing a Viper 791xv in my truck soon. That should be easy enough, I've done a few already.
My question is how can I keep the memory seats with the Viper alarm?
The truck is a 2000 Ford Expedition Eddie Bauer
Replies:
Posted By: jacqueslacombe
Date Posted: January 20, 2006 at 3:22 AM
Well you can always go the the memory switch directly with the disarm wire but you have to check the polarity of the memory switch (-) or (+) so every time you will unlock the system a pulse will be send to the memory switch .!
-------------
cocolaboy
Posted By: MistercMK
Date Posted: January 20, 2006 at 11:28 AM
That is an option, however I would like the seats to move to a different position with different transmitters just like it does from the factory. Thanks
Posted By: JWorm
Date Posted: January 20, 2006 at 11:47 AM
You need to have a 791XV that was produced in the last couple months. Check the programming section of the install guide and see if ch. 4 and ch. 5 have the option of channel linking. You will also need a Bitwriter to save the settings.
|