96 plymouth breeze door lock problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71144
Printed Date: May 15, 2025 at 5:26 PM

Topic: 96 plymouth breeze door lock problem

Posted By: INSTALLTECH323
Subject: 96 plymouth breeze door lock problem
Date Posted: January 19, 2006 at 11:56 PM

i added door lock module (dei 456l) to a existing alarm system on a 96 plymouth breeze i follow directions correctly the module was programed correctly but after programing unit the door lock system stopped working you could here the factory relays working but the door actuator does not move up or down i also check power going to the actuator power appears only when the door lock switch on the door is pushed to unlock. other than that their is no power when you push lock button

-------------
MECP CERTIFIED TECH

Replies:

Posted By: desh187
Date Posted: January 20, 2006 at 12:54 AM

check the door lock fuse which is on the drivers left side of dash,also check the fuses beside battery.I had the same problem once and had to replace door lock fuse and after disconnecting the battery negative terminal for a few seconds everything was okay.

Posted By: Velocity Motors
Date Posted: January 20, 2006 at 7:56 AM

The Plymouth uses a Type F system. Did you get the resistance of the LOCK & UNLOCK wires within 2 % of the appropriate resistance ?

Use positive (+) trigger thru a 620 ohm resistor to lock, and a positive (+) trigger thru a 2.7K ohm resistor to unlock.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: INSTALLTECH323
Date Posted: January 24, 2006 at 7:06 AM

i used a module 456l for the door locks

-------------
MECP CERTIFIED TECH

Posted By: mo12v
Date Posted: January 24, 2006 at 8:39 AM

As desh 187 posted: Check Fuses first. Get the Door Locks working with the Switch, even if you have to disconnect 461L. Then go back & RELEARN 461L.
Follow instruction EXACTLY.
I have had issues with the 461L & don't use it.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.