Alpine SEC-8027
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71148
Printed Date: May 14, 2024 at 8:18 PM
Topic: Alpine SEC-8027
Posted By: scout238
Subject: Alpine SEC-8027
Date Posted: January 20, 2006 at 1:08 AM
Hi, My brother just got a truck that has an Alpine SEC-8027 already installed, though the remote doesn't work and the shock sensor is wayyy to sensitive.... I was wondering if anyone had a copy of any documentation? ie manual, install guide, or anything. I tried to find stuff by google... but couldn't find anything. Also on forum people sent them to personal emails. Thanks in advance! -Nathan
Replies:
Posted By: jacqueslacombe
Date Posted: January 20, 2006 at 2:44 AM
HI! Check if there is a toggle switch to put the remote stater on or off under the dash before saying the remote starter does not work and for the shock sensor there is alwayls a potentionmeter to adjust the sensitivitise of the shock sensor ! GOOD LOCK
-------------
cocolaboy
Posted By: Velocity Motors
Date Posted: January 20, 2006 at 8:04 AM
jacqueslacombe, Nathan didn't mention anything about a remote start rather that his remote didn't work. The impact sensitivity knob is on the side of the CPU where the main harness is attached to right next to the impact sensor plug. As far as the remote control, make sure that you have a new battery and the small LED on the top lights up when any button is pressed.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: kgerry
Date Posted: January 20, 2006 at 8:24 AM
did you try Alpine's website? they are making a lot more info available there.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: sk8ingsmurf
Date Posted: January 20, 2006 at 8:35 AM
I cant find the users manual for the 8027 but if you go to alpine's website they have the one for the 8028. Its under support in the tech center, dont know much about the alpine alarms and how similar this may be, but hopefully it will be of some help. Good luck
Posted By: scout238
Date Posted: January 20, 2006 at 4:45 PM
Thank you so much for the replies, and yes I did try alpine. alpinetechcenter.com has info.. though for this model all they have is a 2 page little wiring schematice and feature list. I was hoping someone here would have something of more value to me, like an owners manual or something. For future reference on Alpine products... it does seem to have a lot of info: www.alpinetechcenter.com
|