Print Page | Close Window

lock wires, 2004 jeep liberty

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71204
Printed Date: July 19, 2025 at 3:23 PM


Topic: lock wires, 2004 jeep liberty

Posted By: hexnut
Subject: lock wires, 2004 jeep liberty
Date Posted: January 20, 2006 at 11:03 PM

Hello,I need to know which wires do what,I have 4 going to my drivers lock switch.1 should be neg 1 should be illuminate 1 lock and 1 unlock,anyone know the colors of which 1 does what?I am not getting proper readings or voltage changes from locking or unlocking.Thank you.The vehicle is a 2004 jeep liberty.




Replies:

Posted By: OhioMike1101
Date Posted: January 20, 2006 at 11:06 PM
they  are multiplexed!

-------------
South Side Audio
2501 S. High St
Columbus, OH 43207



Posted By: hexnut
Date Posted: January 20, 2006 at 11:09 PM

Sorry ohiomike but I don't know what that means lol.




Posted By: hexnut
Date Posted: January 20, 2006 at 11:28 PM
Ok,did a search and kinda know what that means but it still doesn't help me on which wires to hook to?



Posted By: hexnut
Date Posted: January 21, 2006 at 11:01 AM
Can anyone tell me how to test for the lock unlock wires as in what kind of readings I should be getting?



Posted By: mo12v
Date Posted: January 21, 2006 at 12:24 PM

I iuse the OMEGA DB-CHDL4P or DB-CHDL4

But you can hardwire:

Power LockPINK/VIOLET**AT BCM ON BACK OF
Power UnlockSINGLE WIRE SYSTEMJUNCTION BLOCK IN DRIVER KICK PANEL
**Single Wire-Resistor Door Lock Circuit .
** Chassis Ground Thru 1.4K Ohm Resistor For Lock And A Chassis Ground Thru 425 Ohm Resistor For Unlock Also Found In Harness From Door High In Dr Kick ............Use Relays.



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: hexnut
Date Posted: January 21, 2006 at 9:32 PM
Thanks for the input everyone.I got it installed and everything works.



Posted By: zshopa
Date Posted: January 30, 2006 at 11:25 AM

got any pics of the connections for the lock and unlock?

or a quick runthrough of what you did, i want to do mine this weekend and dont seem to understand that part of it.


Print Page | Close Window