2001 corolla alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71264
Printed Date: July 19, 2025 at 5:13 PM
Topic: 2001 corolla alarm
Posted By: lo_chi
Subject: 2001 corolla alarm
Date Posted: January 22, 2006 at 5:58 AM
I heard that if the starter wire is cut on the 2001 Toyota Corolla and you try to start it, it will deploy the airbags.
Is this true, because I want to install a car alarm that has a starter disable in it?
Replies:
Posted By: Powermyster
Date Posted: January 22, 2006 at 6:03 AM
don't see how it wouldn't but would wanna try find out. it shouldn't deploy if your concerned go with the fuel pump for immobiliser.. its a better immobiliser anyway
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: Velocity Motors
Date Posted: January 22, 2006 at 8:11 AM
Not true. I have done lots of these Corolla's in the past and I cut the wire for a starter interrupt and no problems with the AIR BAG light or an airbag going off in my face.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Mike M2
Date Posted: January 22, 2006 at 8:26 AM
Heheheehee...Nope, won't happen. Done hundreds, never had an issue. Who told you such a tale?
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: lo_chi
Date Posted: January 24, 2006 at 8:28 PM
I got that from the bulldog site that this site linked to.
https://www.bulldogsecurity.com/wires/toycoro00-01.htm
Read the note at the bottom.
Posted By: lo_chi
Date Posted: January 24, 2006 at 8:33 PM
I am trying to install a feature on my Corolla that allows my alarm to roll down my windows. I found the right wires, I think but when I apply the voltage and ground, nothing. The passenger window comes down if I disconnect the window switch panel on the driver side. Can anyone help?
Posted By: mo12v
Date Posted: January 24, 2006 at 9:18 PM
| Window Up | DriverF\ YELLOW
PassF\ GRN/RED
Dri.Rear\ RED / GRN
PassRear\ RED / BLK | @ MAIN SWITCH | | Window Down | DriverF/ GREEN
PassF/ BLU/WHT
DriverR/ BLU/BLK
PassR/ BLU/RED |
Reversal Rest At Ground Power Window Circuit ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: lo_chi
Date Posted: January 24, 2006 at 9:31 PM
Those wire are the ones I used, what could I be doing wrong.
Posted By: mo12v
Date Posted: January 24, 2006 at 9:33 PM
Don't know what you are using for Window Module or if you are using Relays but the circuit is: Reversal Rest At Ground Power Window Circuit ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: lo_chi
Date Posted: January 25, 2006 at 5:54 AM
I am using relays and all I want is for the 2 front windows to roll down when the alarm sends the 5 second ground pulse.
Posted By: lo_chi
Date Posted: January 25, 2006 at 2:23 PM
I am not 100% sure what Reversal Rest At Ground Power Window Circuit
|