2004 Dodge Ram 457C module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71299
Printed Date: May 14, 2025 at 7:19 AM

Topic: 2004 Dodge Ram 457C module

Posted By: jortiz
Subject: 2004 Dodge Ram 457C module
Date Posted: January 22, 2006 at 7:44 PM

Need wiring help for 457C module. Its a 2004 Dodge Ram pickup.

-------------
Drop it, Bagg it, & Drag it!! Nissan 4 Life

Replies:

Posted By: another-kelly
Date Posted: January 22, 2006 at 8:22 PM

** MAIN HARNESS **

black = ground

red = +12v

WHITE/ black = not used

violet/black = not used

RED / white = not used

green = neg. lock from alarm or RS

blue = neg. unlock from alarm or RS

ORANGE / black = to OBDII connector

blue/white = status output from RS (on a DEI systems it's also blue/white)

orange = not used

Posted By: gus1
Date Posted: January 23, 2006 at 12:48 AM

You will also need the 3 pin pink/pink/black and brown harness to provide the door lock output to the vehicle. You won't need the brown, but you may need either one of the pinks, dependant on wheter or not you have factory content security.

Gus

-------------
Wherever I go, that is where I end up......

Print Page | Close Window