2004 silverado SS pats 2 Bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71315
Printed Date: May 13, 2025 at 8:17 PM

Topic: 2004 silverado SS pats 2 Bypass

Posted By: trtex
Subject: 2004 silverado SS pats 2 Bypass
Date Posted: January 22, 2006 at 11:46 PM

Recently installed a remote start and a PLZAP Bypasskit bypass in a 2004 Silverado. Everthing works fine except the security light stays on all the time. I think I figured out that this Bypass is the wrong one. Which should I be using....PLJX Bypasskit or DEI model or what????? Thanks!

Replies:

Posted By: redpeppers
Date Posted: January 23, 2006 at 12:41 AM

sounds like u have it wired wrong.......i have never used a pljx...but i have never had any probs with DEI bypass mods.... (not to say that to one u used is bad) Give us the info on how u wired and maybe we can help.

-------------
Where theres is a wire there's a way.

Posted By: trtex
Date Posted: January 23, 2006 at 6:40 AM

Did you understand I used a PLZAP??? According to the bypasskit.com web site, it's not listed to be used with the 2004 Silverado...so I'm looking for an alternative. With the PLZAP, the security light will not go off even if I use the key because it's not overiding the VATS as well...according to what I have read. The guy who sold it to me sold me the wrong one!!

Posted By: kgerry
Date Posted: January 23, 2006 at 8:43 AM

457G or 555L or 556L or PLJX or XK01.....

any of these will work and be correct.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: trtex
Date Posted: January 23, 2006 at 9:21 AM

Thanks!!!

Posted By: trtex
Date Posted: January 23, 2006 at 2:41 PM

Installed remote start. Used Bypasskit PLZAP bypass..Works fine except Security light stays on even when using just a key to start.....will changing bypass to a PLJX Bypasskit solve the problem? The supplier of the PLZAP says to try wiring it to the Neg. on relay pack so it won't drop out during cranking and this will solve my problem. I've ordered the PLJX anyway. Thoughts?

Print Page | Close Window