Autopage 850, 90 Cherokee
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71424
Printed Date: July 16, 2025 at 8:07 PM
Topic: Autopage 850, 90 Cherokee
Posted By: fram
Subject: Autopage 850, 90 Cherokee
Date Posted: January 24, 2006 at 2:00 PM
Hi,
I've done a search but I cannot post in older threads about this topic.
I'm installing a Autopage 850 into my 90 Cherokee Limited. I have a question regarding the H1/1 Violet wire "Starter Output" on page 8 of this install manual: https://www.autopageusa.com/resources/RS855LCD_Install_rv72104.pdf (I know it's for a 855 but it is almost the same as my 850 install manual, well at least this section is)
It shows the Violet wire must be installed after the "Starter Cut Relay" when used and before the netural safety switch.
Is this relay something I add or will it already be there?
If so where would I find it?
Replies:
Posted By: feenal
Date Posted: January 24, 2006 at 2:35 PM
you can simply hook this wire up to the starter wire(dark green I think...test it) in the ignition harness.
Posted By: mobile1
Date Posted: January 24, 2006 at 2:54 PM
the starter cut relay is a relay that you would have to add.
Posted By: fram
Date Posted: January 24, 2006 at 3:08 PM
Thank you for the info. THat makes sense now. Cheers!
Posted By: fram
Date Posted: January 24, 2006 at 6:56 PM
OK another question. My wiring diagram is giving me a 50/50 for the parking light output.
Wire H2/2 Page 9
Autopage 855 Manual
Will this power up my parking lights by the alarm or draw power from the headlight switch into the alarm? Right now the wire I have chosen is live all the time. I think I have the wrong side of the switch.
Posted By: mo12v
Date Posted: January 24, 2006 at 9:41 PM
What is your Vehicles Parking Light Amps now?
Is there a fuse for ONLY the Parking lights?
10amps is close to standard, but if your Vehicle requires more then you will have to use a Relay
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: fram
Date Posted: January 26, 2006 at 3:43 PM
I figured out I was on the wrong side of the switch.
Yes the parking lights are on their own circuit. I'll check the amperage anyways.
I have extra relays but they do not have a diode as my Starter kill relay comes with. Would I need a diode for light control?
Posted By: fram
Date Posted: February 26, 2006 at 2:04 AM
Well long time since I posted this.
I was sick for awhile with the flu and the 850 I had was not working properly so after a long delay I was given a 860 to install. I'm at the last stage the power locks.
Do I have a alternating wire setup as I have a separate relay for lock and a separate relay for unlock? I have factory keyless entry...
|