2001 Nissan Frontier remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71525
Printed Date: May 15, 2024 at 11:42 PM

Topic: 2001 Nissan Frontier remote start

Posted By: holtonch
Subject: 2001 Nissan Frontier remote start
Date Posted: January 25, 2006 at 11:26 PM

Need tachometer wire and location for 3.3L V6

Replies:

Posted By: holtonch
Date Posted: January 25, 2006 at 11:29 PM

Also need Ignition 2 and Accessory 2 and 3 if applicable

Posted By: iskidoo
Date Posted: January 25, 2006 at 11:50 PM

https://directechs.com/directwire/print.asp?action=select&yr=3261&product=Remote%20Start

Tachometer ~ pink/blue or black ~ instrument cluster or ECM
Notes: The ECM is located below the heater box to the right of the accelerator pedal, behind trim panel. The tach is in the top row, 3rd pin left of center of the plug. The VSS is in the 2nd row from the top, 4th pin right of center.

Ignition BLACK/ white + ignition harness
posted_image

Accessory RED / yellow + ignition harness
posted_image

2nd Accessory** WHITE/ blue + ignition harness

**Not required for remote start.

-------------
Steve G

Posted By: jacqueslacombe
Date Posted: January 26, 2006 at 12:42 AM

Don't forget nissan car need (2) starter wire (1) ign (1) acc to work and for the tach you can always use an injector usualy there are easy access

IGN=blk/white

acc=RED / yellow

starter 1=blk / YELLOW

starter 2=GREEN/ YELLOW blk=black

Posted By: cosmoworks
Date Posted: January 26, 2006 at 11:08 AM

Tach is definitely pink/blue at the ECM pin #3, which is located on the floor to the right of the gas pedal (you can actually see the ECM in iskidoo's picture.

To find pin 3 at the ECU, it's the 11th pin from the top left on the connector.