paslock interface

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71542
Printed Date: May 21, 2024 at 2:25 PM

Topic: paslock interface

Posted By: wlfgnggtr
Subject: paslock interface
Date Posted: January 26, 2006 at 8:10 AM

Does anyone know the proper procedure for interfacing the gm paslock when installing a remote start on a 99 Pontiac Grand Am?

Replies:

Posted By: tjdurham
Date Posted: January 26, 2006 at 8:42 AM

what kind of bypass do you have ?

the best one for this car is DEI555L you have to take the radio out to access the ignition switch wires

-------------
tj

Posted By: Velocity Motors
Date Posted: January 26, 2006 at 9:36 AM

There are about 6 different modules & 3 different methods for bypassing the Passlock II system on the Grand Am. The easiest way is to purchase a bypass module that will interface and bypass the system without the use of relays and resistors. They will range in price between $ 20 - $ 50 depending on the place that you purchase from.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: wlfgnggtr
Date Posted: January 26, 2006 at 6:52 PM

Thanks for the help. The DEI 555L is what I was thinking about, that was what was recomended in the manual with the remote start. Thanks again...
Todd

Print Page | Close Window