ungo sr6000 starter disable
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71545
Printed Date: May 14, 2025 at 1:27 AM
Topic: ungo sr6000 starter disable
Posted By: mrcllusb
Subject: ungo sr6000 starter disable
Date Posted: January 26, 2006 at 8:47 AM
I was reading the owners manual on this alarm,and it says is has the prosecurity starter disable,but nowhere in the wiring diagram does it show this.Is Clarion false advertising us into buying an extra relay or is it a misprint in their instructions??
-------------
"ole blake"
Replies:
Posted By: Velocity Motors
Date Posted: January 26, 2006 at 9:31 AM
The starter disable is a FEATURE that you pay for, but the actual parts required you will need to purchase ( like the relay ). Clarion gives you the output on the system harness to attach to a relay ( that you purchase ) and then you may need to program this wire to do what you want as well. No false advertisment rather selective wording is what they used.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mrcllusb
Date Posted: January 27, 2006 at 1:02 AM
Which output is this labeled as??
-------------
"ole blake"
Posted By: mrcllusb
Date Posted: January 27, 2006 at 1:07 AM
Would it be the orange"ground when armed "wire?
-------------
"ole blake"
Posted By: feenal
Date Posted: January 27, 2006 at 1:29 AM
I have to disagree with you there...the starter kill is built into all ungo remote starters and alarms....there will be 2 wires coming from the brain, a purple and a green....one for key side and one for motor side.
Posted By: infoaudio01
Date Posted: January 27, 2006 at 1:38 AM
green - Keyside purple - Motorside you may also use the orange ground when armed output to trigger a relay for starter kill. 85 use orange wire from alarm, 86 use 12v+ constant, 87a keyside, and 30 motorside. you do not need to use 87.
Posted By: mrcllusb
Date Posted: January 27, 2006 at 9:58 AM
I look at the sr-6000 install manual,and there is nothing in there that list wires for a starter kill circuit.Take a look and if you find it,please point it out to me
-------------
"ole blake"
Posted By: mrcllusb
Date Posted: January 27, 2006 at 10:01 AM
It clearly states on page 3 in the table of contents of the install manual,"locations for optional starter kill relay."
-------------
"ole blake"
Posted By: feenal
Date Posted: January 27, 2006 at 11:54 AM
is there a violet and dark green wire coming from the relay pack or module
Posted By: mrcllusb
Date Posted: January 27, 2006 at 9:11 PM
Yes it is,so thats the starter kill wires??? How come they didn't label it as such..
-------------
"ole blake"
|