Print Page | Close Window

05 Jetta remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71551
Printed Date: May 14, 2025 at 1:31 PM


Topic: 05 Jetta remote start

Posted By: nuugen
Subject: 05 Jetta remote start
Date Posted: January 26, 2006 at 10:59 AM

Anyone done this car yet..I would like to pick up the locks inside the car instead of going into the door..

Also, DEI shows the lock resistor values as unknown, has anyone tested them yet??



-------------
Cary
German Auto Pros



Replies:

Posted By: extreme1
Date Posted: January 26, 2006 at 12:10 PM
STRAIGHT ground to lock, 160ohms to unlock

this is for the Jetta V 05.5 - 06

there are a few modules that will make your job much easier.

CAN SL

CAN 1

VWDL2

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta



Posted By: nuugen
Date Posted: January 26, 2006 at 4:21 PM

Actually the resistance varies from car to car, this one had a 240 ohm unlock! I am going to post my notes in a few...

I didn't know the CAN adaptors were on the market already, who is making these??



-------------
Cary
German Auto Pros



Posted By: notoriouswill
Date Posted: January 29, 2006 at 1:09 AM
The CAN adapters make life a lot easier for these vehicles especially the chryslers. The CAN-SL is made my compustar and the CAN 1 is DEI. Either one works well but I have had more experience with the CAN-SL personally.

-------------
1 Memphis Mojo 15
1 Memphis 4000 watt amp
1 Memphis 75watt 4 channel amp
2 Memphis 6.5" MSQ's
posted_image


Print Page | Close Window