06 Pontiac Torrent remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71611
Printed Date: July 14, 2025 at 6:47 PM
Topic: 06 Pontiac Torrent remote start
Posted By: au5599
Subject: 06 Pontiac Torrent remote start
Date Posted: January 27, 2006 at 10:58 AM
PLXR learned no problem. Waited for a minute or 2. Started no problems. Arm factory alarm, wait few more minutes, start it but it doesnt crank and theft light flashes. Then triggers factory alarm. It should be shutting down factory alarm when remote started. Key sense is hooked up also.
Replies:
Posted By: extreme1
Date Posted: January 27, 2006 at 11:08 AM
did you program PLXR to Passlock2?
It's programmed to ION/Cobalt right out of the box.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: au5599
Date Posted: January 27, 2006 at 11:20 AM
yep. Been using these since they came out. Only thing different is this one was the omega version. I just swapped out with the normal ones from trilogix. Now I am gonna re do the sequence to see if it was just that interface.
Posted By: au5599
Date Posted: January 27, 2006 at 11:58 AM
Called good ole Mike, found some good info. Once door closes it stops working. So it needs to get programmed with door closed. Some of these and equinox have this issue. Not alot, just some here and there.
Posted By: gus1
Date Posted: January 27, 2006 at 12:06 PM
Huh???
Never ever heard of that....
There wouldn't happen to be a plus sign on the key, would there???
Gus
-------------
Wherever I go, that is where I end up......
Posted By: au5599
Date Posted: January 27, 2006 at 1:39 PM
The Torrent is the exact same as the equinoxs. Like the Yukon and the Tahoe. So to answer your question no it is not a transponder key. Besides if it was after programming a PLXR it wouldnt start up. PLXR only does vats, passlock I and passlock II.
Posted By: gus1
Date Posted: January 27, 2006 at 3:26 PM
So, why in the world would anything such as a resistance that is generated by the key cylnder in the column CHANGE if the door is closed???
This strikes me as rather odd.....
Gus
-------------
Wherever I go, that is where I end up......
Posted By: au5599
Date Posted: January 27, 2006 at 3:36 PM
odd as it may be, But when the door closed and I relearned it it is working flawlessly.
Posted By: gus1
Date Posted: January 27, 2006 at 5:36 PM
That is rather.... ummm.... welll.... ****ed.
Goooooooo GM!
Something else to watch out for, I guess.
Gus
-------------
Wherever I go, that is where I end up......
|