556u mini cooper remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71689
Printed Date: August 17, 2025 at 4:55 AM

Topic: 556u mini cooper remote start

Posted By: 12vdemon
Subject: 556u mini cooper remote start
Date Posted: January 28, 2006 at 4:47 PM

If anyone has info it would be greatly appreciated on getting the antenna from the 556u to work around the key ring properly. Any luck hardwiring w/o antenna ring? Using the Hornet 570T remote start.

Replies:

Posted By: Ween
Date Posted: January 28, 2006 at 5:32 PM

hi,

use the alternate immobilizer interface #2 as described in the instructions.

should work fine as the electronics of the car are BMW-based.

hope this helps,

mark

Posted By: 12vdemon
Date Posted: February 01, 2006 at 10:25 PM

Awsome. It works. The manual for the 556 is a little messed up w/ instructions being listed the same even though there are 2 different pics for interface #1 and #2. Anyway I went with cutting 1 of the 2 transponder wires near the key ring and connecting black (556) wire to transponder box and the BLACK/ red & BLACK/ white (556) to the key ring side. Thanks for the help!

Print Page | Close Window