Print Page | Close Window

06 silverado clutch bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71720
Printed Date: October 31, 2024 at 6:37 PM


Topic: 06 silverado clutch bypass

Posted By: slammed97mini
Subject: 06 silverado clutch bypass
Date Posted: January 28, 2006 at 10:41 PM

does anyone know anything about bypassing the clutch in an 06 silverado. its kinda different. there is a box with a spring on the shaft that goes through the firewall to the clutch master cylinder and it has 6 wires in it.



Replies:

Posted By: Velocity Motors
Date Posted: January 29, 2006 at 9:29 AM
Test the wires to see which one changes polarity when you depress the clutch and start the truck. See if it goes to ground or 12 volts and tag this wire with the appropriate polarity when remote starting.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: sparkie
Date Posted: January 29, 2006 at 11:46 AM
The dark green wire at the clutch switch requires a positive pulse to allow the engine to crank. You must still power the yellow starter wire too. You need a relay to isolate these two wires.

-------------
sparky




Posted By: slammed97mini
Date Posted: January 30, 2006 at 3:29 PM
hey sparkie is there anything else i need to do othere than power this wire during remote start.




Posted By: sparkie
Date Posted: January 30, 2006 at 7:16 PM
Other than the clutch bypass and the starter motor wire, I don't believe there is anything else needed to get it to start. I haven't done one myself, but I have that info listed for them.

-------------
sparky





Print Page | Close Window