Power connection under dash

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71954
Printed Date: July 25, 2025 at 1:58 PM

Topic: Power connection under dash

Posted By: coppellstereo
Subject: Power connection under dash
Date Posted: February 01, 2006 at 1:11 AM

What is the best way to tap into a power wire under the dash where it connects with a harness?

Thanks!

-------------

Replies:

Posted By: Ravendarat
Date Posted: February 01, 2006 at 1:24 AM

splice and solder. DONT USE T-TAPS esspecially for high current applications

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: coppellstereo
Date Posted: February 01, 2006 at 1:40 AM

so just expose the wire and the solder from there?

what about T-taps on smaller wires, like the wire I will tap into to activate a window module for instance?

-------------

Posted By: Powermyster
Date Posted: February 01, 2006 at 3:17 AM

always splice and solder

no problems later

-------------
Why oh Why didn't i take the blue pill
Darren Power

Print Page | Close Window