delayed domelight

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7196
Printed Date: June 09, 2024 at 10:24 PM

Topic: delayed domelight

Posted By: FullForce
Subject: delayed domelight
Date Posted: December 26, 2002 at 10:48 PM

Installed Hornet 553T in 98 Chevy Blazer. Since domelight stays on for 15 seconds or so after last door is shut the alarm sees an open door if armed when domelight is still on and reports zone 3. Diode isolate the domelight wire? If so, I was wondering where the diode needs to be? Thanks.

Replies:

Posted By: Velocity Motors
Date Posted: December 28, 2002 at 10:58 AM

Use either diagram for your application:

https://www.velocitymotorsport.com/Door_trigger_isolation.pdf

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: cavyinthegarage
Date Posted: December 28, 2002 at 11:30 AM

there should be a feature you can program in menu 1 or 2 to ignore open triggers while arming.. it should say in the instalation manual directed.com.. my sidewinder does it, and vipers do to so I figure all dei's do it..

-------------

Print Page | Close Window