Hi i tryed searching the forum still have trouble on hooking up my parking lights, Door locks on 1996 1500 dodge ram full size pickup heres the remote starter i have
i hook up the brown wire from the rs to the truck wire BLACK / YELLOW (+) wire @ yellow plug drivers kick panel and the lights wont flash is there somthing i need to get it going last thing power door locks this is the way i did it wires from rs unlock signal WHITE/ black to pink/violet blue plug @drivers kick panel, lock signal white from rs to ORANGE / violet blue plug @drivers kick panel, rs yellow/black +12 volt, yellow +12 volt to trucks +12 volt then i tried to lock and unlock pops the fuses all the time any ideas would be great everthing else on the rs is done just need the lights and door locks thanks.
Thanks powermyster that worked my lights flash when i hit the alarm but when i remote start my truck the parking lights don't come on, any idea on the door locks Thanks for ur help.
Ok this is what i did to try it out it worked but it only unlocks & locks my drivers door doesn't do anything to passenger door i went straight to the switch in my door panel
any ideas how to get both doors to lock and unlock
and i cut the 2 wires going to the switch to the door lock because when it was connected it keep on poppin the fuses
i might be able to help. i'm the one who posted the pic you are using of the diagram.
first, do you have the box and instructions and everything for this system?
5 wire both the lock and unlock. I had this happen to a Dakota as well and I ended up 5 wiring both wires.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Not familiar with the System you have but, Using the Wire Diagram you posted the 2nd time:
@ driver Kick Panel:
You should be able to Unsnap the Plug & Boot on the outside between the Door & Kick Panel.
( Push in on 4 corners of Boot & Plug. You don't have to take rubber boot off )
Then pull wires thru to outside to connect a little easier.
( might require a hook tool to Unsnap the 4 corners of the plug. I usually unsnap 3 and it comes out.
Cut ORANGE / Violet LOCK & PINK / Violet UNLOCK Wire in Half.
One Half of Lock & Unlock wire goes to Door SWITCH
Other Half of Lock & Unlock wire goes to ACTUATORS
Test wires with METER
LOCK:
Connect SWITCH side of cut LOCK wire to ORANGE wire on 6 PIN Plug.
Connect ACTUATOR side of cut LOCK wire to WHITE wire on 6 PIN Plug.
UNLOCK:
Connect SWITCH side of cut UNLOCK wire to ORANGE / Black wire on 6 PIN Plug.
Connect ACTUATOR side of cut UNLOCK wire to WHITE / Black wire on 6 PIN Plug.
Connect YELLOW / Black & YELLOW wire on 6 PIN Plug to Constant 12 volt ( + )
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.