Compustar Manual brain?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72010
Printed Date: May 02, 2024 at 3:36 AM

Topic: Compustar Manual brain?

Posted By: awsomedude
Subject: Compustar Manual brain?
Date Posted: February 01, 2006 at 10:11 PM

I purchased a compustar remote start and got a manual brain instead of an automatic, is there a way to convert it to automatic? There is no loop to cut anymore, they did away with that. Is there something I can do or is it always and forever a manual?

Replies:

Posted By: notoriouswill
Date Posted: February 01, 2006 at 10:40 PM

I am a compustar dealer. With all the ones that I have the ones that do not have a jumper wire in them are for automatic only. The ones with a jumper wire are for manual transmissions but can be cut for automatics. Hopefully this helps. Also what model do you have.

-------------
1 Memphis Mojo 15
1 Memphis 4000 watt amp
1 Memphis 75watt 4 channel amp
2 Memphis 6.5" MSQ's
posted_image

Posted By: awsomedude
Date Posted: February 01, 2006 at 11:06 PM

there isnt a wire in the new ones I guess, I checked for it because I was used to it being there, but it isnt there.

Posted By: KarTuneMan
Date Posted: February 02, 2006 at 2:33 AM

WoW.........your screwed...............too bad!

I feel for ya................

-------------

Posted By: redlinecustoms
Date Posted: February 03, 2006 at 8:48 AM

Just bring it back to where you got it and swap it.

Print Page | Close Window